Service Excellence with Every Machine
Menu
- 18000000000
Menu
The finely ground slurry is fed into the water tank from the feed port located in the middle of the sedimentation zone. Below the inclined water tank is the slurry classification sedimentation zone. The spiral rotates at a low speed to stir the slurry, causing fine particles to suspend on the surface and flow to the overflow weir to overflow. Coarse particles sink to the bottom of the tank and are transported by the spiral to the discharge port as return sand. The position of the overflow weir is higher than the bearing center at the lower end of the spiral shaft and lower than the upper edge of the spiral at the overflow end.
◎ An automatic return sand lifting device is added to the return sand end, and the ball mill cancels the configuration of the large spoon head;
◎ Generally, 1-1.5 degrees of electricity can be saved per ton of ore;
◎ Frequent maintenance of the large spoon head of the ball mill is avoided;
◎ The uneven impact of the ball mill on the large and small gears is reduced.
Applicable to coarse particle classification.
Submerged spiral classifier
The finely ground slurry is fed into the water tank from the feed port located in the middle of the sedimentation zone. Below the tilted water tank is the slurry classification sedimentation zone. The spiral rotates at a low speed to stir the slurry, causing the fine particles to suspend on the surface and flow to the overflow weir to overflow. The coarse particles sink to the bottom of the tank and are transported by the spiral to the discharge port as return sand.
◎ The entire spiral at the overflow end is submerged below the liquid surface of the sedimentation zone, and the sedimentation zone has a large area and depth;
◎ An automatic return sand lifting device is added to the return sand end, and the ball mill cancels the configuration of the large spoon head;
◎ Generally, 1-1.5 degrees of electricity can be saved per ton of ore;
◎ Avoid frequent maintenance of the large spoon head of the ball mill;
◎ Reduce the uneven impact of the ball mill on the large and small gears.
| type | model | revolution speed of screw
(r/min) |
Capacity according to return sand (t / d) | Processing capacity by overflow (t / d) | screw diameter
(mm) |
Helical Length (mm) | Sink slope | Transmission motor model | Transmission motor power (kW) | Lift motor model | Lift the motor power (kW) | weight
(kg) |
|
High weir single helix |
FG-300 | 7.7 | 30~80 | 10~30 | φ 300 | 3900 |
14~18 |
Y100L1-4 |
2.2 |
hand movement |
— |
668 |
| FG-500 | 8 | 145~260 | 32 | φ 500 | 4390 | Y112M-6 | 1600 | |||||
| FG-750 | 7.8 | 256~654 | 65 | φ 750 | 5500 | Y132S-6 | 3 | 2716 | ||||
| FG-1000 | 6.7 | 473~1026 | 85 | φ 1000 | 6556 | Y132M2-6 | 5.5 | 4000 | ||||
| FG-1200 | 5，6，7 | 1145~1600 | 150 | φ 1200 | 6500 | Y132M2-6 | 5.5 | Y90L-4 | 1.5 | 7943 | ||
| FG-1500 | 2.5，4，6 | 1140~2740 | 235 | φ 1500 | 8265 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 11827 | ||
| FG-2000 | 3.6，5.5 | 3890~5940 | 400 | φ 2000 | 8700 | Y160L-6/4 | 11，15 | Y100L2-4 | 3 | 20814 | ||
| FG-2400 | 3.6 | 6800 | 580 | φ 2400 | 9130 | Y200L2-6 | 22 | Y112M-4 | 4 | 24194 | ||
| FG-3000 | 3.2 | 11625 | 890 | φ 3000 | 12500 | Y200L-4 | 30 | Y112M-4 | 4 | 42188 | ||
|
High weir double helix |
2FG-1200 | 5，6，7 | 2340~3200 | 310 | φ 1200 | 6500 | Y132M2-6 | 5.5×2 | Y90L1-4 | 1.5×2 | 15840 | |
| 2FG-1500 | 2.5，4，6 | 2280~5480 | 470 | φ 1500 | 8230 | Y160M-6 | 7.5×2 | Y100L1-4 | 2.2×2 | 22903 | ||
| 2FG-2000 | 3.6，5.5 | 7780~11880 | 800 | φ 2000 | 8400 | Y160L-4 | 15×2 | Y100L2-4 | 3.0×2 | 34621 | ||
| 2FG-2400 | 3.63 | 13600 | 1160 | φ 2400 | 9130 | Y200L2-6 | 22×2 | Y112M-4 | 4×2 | 42460 | ||
| 2FG-3000 | 3.2 | 23300 | 1785 | φ 3000 | 12500 | Y200L-4 | 30×2 | Y112M-4 | 4.0×2 | 73030 | ||
|
Sinking single helix |
FC-1000 | 2.5~7.4 | 160~700 | 50~260 | φ 1000 | 8397 | Y132M2-6 | 5.5 | hand movement | — | 5225 | |
| FC-1200 | 5~7 | 1150~1640 | 120 | φ 1200 | 8400 |
Y160M-6 |
7.5 |
Y90L-4 | 1.5 | 9583 | ||
| FC-1500 | 2.5~6 | 1140~2740 | 185 | φ 1500 | 10500 | Y100L1-4 | 2.2 | 14226 | ||||
| FC-2000 | 3.6~5.5 | 3240~5940 | 320 | φ 2000 | 13000 | Y160L-4 | 15 | Y100L2-4 | 3 | 27753 | ||
| FC-2400 | 3.6 | 6800 | 455 | φ 2400 | 14130 | Y200L1-6 | 18.5 | Y112M-4 | 4 | 32467 | ||
| FC-3000 | 3.2 | 11650 | 705 | φ 3000 | 14300 | Y200L-4 | 30 | Y112M-4 | 4 | 43500 | ||
|
Sinking double helix |
2FC -1200 | 3.8~6 | 1770~2800 | 240 | φ 1200 | 8040 |
Y160M-6 |
7.5×2 |
Y100L1-4 |
2.2×2 | 19610 | |
| 2FC-1500 | 2.5~6 | 2280~5480 | 370 | φ 1500 | 10500 | 27450 | ||||||
| 2FC-2000 | 3.6，5.5 | 7780~11880 | 640 | φ 2000 | 12900 | Y200L2-6, Y200L-4 | 22，30 | Y100L2-4 | 3.0×2 | 50621 | ||
| 2FC-2400 | 3.67 | 13700 | 910 | φ 2400 | 14130 | Y25S-4 | 37 | Y112M-4 | 4.0×2 | 65283 | ||
| 2FC-3000 | 3.2 | 23300 | 1410 | φ 3000 | 14300 | Y225M-4 | 45 | Y112M-4 | 4.0×2 | 84900 |
1. Consult Sales: Talk to our sales team to pick your machine.
2. Test Drive or Video Viewing: Visit our site for a test drive or view detailed videos of our machinery.
3. Pay Deposit: Secure your choice with a deposit.
4. Schedule Delivery: We arrange pre-delivery and delivery based on your timing.
5. Final Payment: Make the final payment.
6. Receive Machine: Get the machine delivered to your address.
1. Consult Sales: Talk to our sales team to pick your machine.
2. Test Drive or Video Viewing: Visit our site for a test drive or view detailed videos of our machinery.
3. Pay Deposit: Secure your choice with a deposit.
4. Schedule Delivery: We arrange pre-delivery and delivery based on your timing.
5. Final Payment: Make the final payment.
6. Receive Machine: Get the machine delivered to your address.
1. Consult Sales: Talk to our sales team to pick your machine.
2. Test Drive or Video Viewing: Visit our site for a test drive or view detailed videos of our machinery.
3. Pay Deposit: Secure your choice with a deposit.
4. Schedule Delivery: We arrange pre-delivery and delivery based on your timing.
5. Final Payment: Make the final payment.
6. Receive Machine: Get the machine delivered to your address.
1. Consult Sales: Talk to our sales team to pick your machine.
2. Test Drive or Video Viewing: Visit our site for a test drive or view detailed videos of our machinery.
3. Pay Deposit: Secure your choice with a deposit.
4. Schedule Delivery: We arrange pre-delivery and delivery based on your timing.
5. Final Payment: Make the final payment.
6. Receive Machine: Get the machine delivered to your address.
1. Consult Sales: Talk to our sales team to pick your machine.
2. Test Drive or Video Viewing: Visit our site for a test drive or view detailed videos of our machinery.
3. Pay Deposit: Secure your choice with a deposit.
4. Schedule Delivery: We arrange pre-delivery and delivery based on your timing.
5. Final Payment: Make the final payment.
6. Receive Machine: Get the machine delivered to your address.
Interested In A Specific Piece Of Machinery? Don’t Hesitate To Contact Us For A More Personalized Consultation!
